Model Pipe Support in FreeCAD (Gallery Serial No.59)

Hello friends welcome to FreeCAD Part Modeling tutorial. In this tutorial we will learn part modeling with the help of Part Design Workbench. If you want to learn FreeCAD from scratch you can buy my Complete FreeCAD Course:From Zero to Expert! on Gumroad. You can download this tutorial FreeCAD model with my FreeCAD 3D Model Library with Serial No.59 As shown in below image.

once you click on image you will directed to Google drive folder where you will get FreeCAD model and it’s 2D Drawing. If you like my work please support me on ko-fi.com even if it’s just enough to Buy me a Coffee every little helps and this will be repaid in full through my sharing of knowledge.

Step by Step Guide to Convert below drawing into 3D Model -:

Select XY plane and create below profile.

Create the pad of 60mm as shown in below image.

Select the bottom face and create below profile.

Now create the pad of 15mm.

Now select the top face and create the below profile.

Now select the pad of 15mm.

Now create the rectangle as shown in below image.

Now create the pad of 30mm.

Now select the top face and create the below profile.

Create the pad as shown in below image.

Create the below profile on top face.

Create the Pad as shown.

Create the Chamfer as shown.

Create circle of dia. 20mm as shown.

Create hole as shown.

Now on back face create two circle of 16mm as shown.

Create hole as shown.

Here complete our tutorial.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”

My FreeCAD Complete Course : now on Payhip My FreeCAD Projects, Models & Drawings now on Payhip