Model Guide Clip in FreeCAD

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Model Auxiliary Fork in FreeCAD. In this tutorial we will do modeling of Model Guide Clip  with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Also Read-:

Select front plane and create the below sketch.

Now extrude the profile as shown in below image.

Now select the face and create the below sketch.

Now remove the material as shown in below image.

Now select the face and create below sketch.

Remove the material as shown in below image.

Now select the top face and create below sketch.

Now create the hole as shown in below image.

Now select the face and create below sketch.

Now create the cut as shown in below image.

Now create the fillet as shown in below image.

Now project the arc edge and create the below slot.

Now create the slot as shown in below image.

Now give fillet of 3mm as shown in below image.

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”