FreeCAD Part Modeling Tutorial 89

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned FreeCAD Part Modeling Tutorial 88. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Freecad Ad 01

Also Read-:

Setup Auto Spacing in FreeCAD Sketcher
Basics of Boolean Operation in FreeCAD
Basics of Loft and Sweep Tool in FreeCAD

89

00

Select the top plane and create below circle.

01

Create the Pad of 80mm as shown in below image.

02

Now select the top face and create below sketch.

03

Now create the Pad of 40mm as shown in below image.

04

Now create the fillet of 20mm as shown in below image.

05

Now create bottom face and create below sketch.

06

Now Create Pad of 40mm as shown in below image.

07

Now create the fillet of 20mm as shown in below image.

08

Now Select the face and project edge and create circle as shown in below image.

09

Create the Pad of 10mm as shown in below image.

10

Now Mirror the Feature as shown in below image.

11

Now Project the outer edge and create the hole sketch of diameter 25mm.

13

Now Create the hole as shown in image.

14

Now select the top face and create below sketch.

15

Now create the Pad as shown in the below image.

16

Create the sketch as shown in below image.

17

Create the cut as shown in below image.

18

Select the top face and create the below sketch.

19

Create the cut shown in the below image.

20

Now select the face and create the hole sketch as shown in the below image.

21

Now create the Hole as shown in below image.

22

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”

Amar Patel
About Amar Patel 222 Articles
Hi, I am Amar Patel from India. Founder, Author and Administrator of mechnexus.com. I am a Simple Average Man who Loves life and Love living life. Professionally I am a Mechanical Engineer with Solid command over CAD software like FreeCAD, SolidWorks, Autodesk Inventor and AutoCAD Mechanical. I’m here to share my knowledge to help you accomplish your design and engineering tasks quicker and easier. I am Passionate about learning new things especially about Open-Source Software. I love teaching therefore I started my YouTube Channel on FreeCAD and I believe FreeCAD have lots of potential than traditional 3D software. contact me - [email protected]