Model Frame Guide in FreeCAD

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned How to Model Chuck Jaw in FreeCAD. In this tutorial we will do modeling of Frame Guide with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Freecad Ad 01

Also Read-:

Model Chuck Jaw in FreeCAD
Model Frame Guide in FreeCAD
Model Cut-off Holder in FreeCAD

Frame Guide_00

Frame Guide_00_00

Now select XY plane and create below profile.

Frame Guide_01

Now extrude the above profile to 48mm as shown in below image.

Frame Guide_02

Now select the face and create below profile.

Frame Guide_03

Now remove the material and set end condition up to face.

 

Frame Guide_04

Now select the face and create sketch for Hole.

Frame Guide_05

Now Remove the material as shown in below image.

Frame Guide_06

Now select the edge and give fillet of 13 mm.

Frame Guide_07

Select edge and give fillet of 6mm.

Frame Guide_08

Now create a datum plane at distance of 30mm as shown in below image.

Frame Guide_09

Now create the hole sketch as shown in below image.

Frame Guide_10

Now create the hole as shown.

Frame Guide_11

Now create fillet of 2 mm as shown in below image.

Frame Guide_12

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”

Amar Patel
About Amar Patel 182 Articles
Hi, I am Amar Patel from India. Founder, Author and Administrator of mechnexus.com. I am a Simple Average Man who Loves life and Love living life. Professionally I am a Mechanical Engineer with Solid command over CAD software like FreeCAD, SolidWorks, Autodesk Inventor and AutoCAD Mechanical. I’m here to share my knowledge to help you accomplish your design and engineering tasks quicker and easier. I am Passionate about learning new things especially about Open-Source Software. I love teaching therefore I started my YouTube Channel on FreeCAD and I believe FreeCAD have lots of potential than traditional 3D software. contact me - [email protected]