FreeCAD Part Modeling Tutorial 29

29_01

Hello friends welcome to FreeCAD Part Modeling Tutorial 29. In this Tutorial I have explained How to Model above part in FreeCAD.  This Tutorial is designed for beginner user to understand  part design Workbench in FreeCAD and basic modeling approach in FreeCAD.

Also Read-:

Let’s Explore the FreeCAD user Interface
List of Supported File Formats in FreeCAD
Beginner Guide to Computer Aided Design

FreeCAD Part Modeling Tutorial 29 (1)

STEP 01-: Select the top plane and create the circle of diameter 50 mm.

29_02

STEP 02-: Now come out of the sketch and create the Pad of 8mm as shown in below image.

29_03

STEP 03-: Now select the face and create circle of 42 mm.

29_04

STEP 04-: Noe create the cut of 5mm.

29_05

STEP 05-: Noe create profile as shown in below image.

29_06

STEP 06-: Now create the pad of 24 mm.

29_07

STEP 07-: Now select the face and create the below profile.

29_08

STEP 08-: Now remove the material End condition will be through all.

29_09

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!”

Watch Video Version of this Tutorial-:

Amar Patel
About Amar Patel 182 Articles
Hi, I am Amar Patel from India. Founder, Author and Administrator of mechnexus.com. I am a Simple Average Man who Loves life and Love living life. Professionally I am a Mechanical Engineer with Solid command over CAD software like FreeCAD, SolidWorks, Autodesk Inventor and AutoCAD Mechanical. I’m here to share my knowledge to help you accomplish your design and engineering tasks quicker and easier. I am Passionate about learning new things especially about Open-Source Software. I love teaching therefore I started my YouTube Channel on FreeCAD and I believe FreeCAD have lots of potential than traditional 3D software. contact me - [email protected]