FreeCAD Part Modeling Tutorial 125

Hello friends welcome to FreeCAD tutorial in our previous tutorial we have learned Making a String Solid in FreeCAD. In this tutorial we will do modeling  in FreeCAD with the help of Part design workbench of FreeCAD. You can also download my source file of the tutorial at https://www.mechnexus.com/mechnexus-youtube-tutorial-source-file/ so let’s start our tutorial.

Freecad Ad 01

125 01

00

Select the Front Plane and Create below Sketch. As Shown in below image.

01

Create the Extrusion of 96mm and set it symmetric to plane.
02Now select Mid plane and create below sketch.
03

Create the Extrusion of 86mm and set it symmetric to plane.
04Select the Bottom face and create below sketch.
05Create the Pad of 14mm as shown in below image.
06Now mirror the pad on other side as shown in below image.
07Select the Front face and create below sketch.
08Create the Pad of 3mm as shown in below image.
09Now mirror the pad on other side as shown in below image.
10Select the front face and create below sketch.
11Create the cut as shown in below image.
12Create the top face and create below sketch.
13Create the Cut of 87mm depth as shown in below image.
14Select the top face and create below sketch.
15Create the Pad of 14mm as shown in below image.
16Now mirror the above pad to other side.
17Select the inner face and create below two circle.
18Create the Pad of 5mm As shown in below image.
19Now mirror the above feature As shown in below image.
20Select the front face and create below sketch as shown in  image.
21Create the Through All Cut as Shown in below image.
22Create the Hole Cut as Shown in below image.
23Create the Hole as shown in below image.
24Polar Pattern as shown in below image.
25Create the hole sketch as shown in below image.
26Polar Pattern Feature as shown in below image
27Create the hole sketch as shown in below image.
28

Create the Hole as Shown in below image.

32

Create the Hole sketch  as shown in below image.

29

Create the Counter bore hole as shown in below image

30Now mirror the counterbore hole as shown in below image.
31

“Thank you for reading! If you found this article insightful and valuable, consider sharing it with your friends and followers on social media. Your share can help others discover this content too. Let’s spread knowledge together. Your support is greatly appreciated!” 

Amar Patel
About Amar Patel 244 Articles
Hi, I am Amar Patel from India. Founder, Author and Administrator of mechnexus.com. I am a Simple Average Man who Loves life and Love living life. Professionally I am a Mechanical Engineer with Solid command over CAD software like FreeCAD, SolidWorks, Autodesk Inventor and AutoCAD Mechanical. I’m here to share my knowledge to help you accomplish your design and engineering tasks quicker and easier. I am Passionate about learning new things especially about Open-Source Software. I love teaching therefore I started my YouTube Channel on FreeCAD and I believe FreeCAD have lots of potential than traditional 3D software. contact me - [email protected]